Reviewed by an engineer
Depends on material & quantity
Deposit, balance before shipment
Duties excluded
One shop, three processes and a coating line
Metal for strength and finish, resin for detail, FDM for size and cost - and the PVD chamber that turns any of them into a product.
Metal printing (SLM/DMLS)
Titanium, 316L, aluminium and tool steel. Load-bearing parts, mould inserts, jewellery.
Resin printing (SLA)
25 um layers, Ra 1.6 um surfaces. Appearance models, masters, transparent parts.
FDM printing
ABS, PETG, PA-CF, TPU. Jigs, fixtures, enclosures, large visual models.
Surface finishing
PVD gold and black, sand blasting, vibration and mirror polishing - in-house.
What each material is actually good at
Properties, applications and the relative cost of each - so the choice is made before the file arrives, not after the quote.
| Material | Key figures |
|---|---|
| Titanium Ti-6Al-4V | 4.43 g/cm3 · 900-1,000 MPa · biocompatible · aerospace, medical, eyewear |
| Stainless steel 316L | 8.0 g/cm3 · 550-650 MPa · marine grade · polishes to mirror |
| Aluminium AlSi10Mg | 2.68 g/cm3 · 300-400 MPa · 130-170 W/mK · heat sinks, housings |
| Tool steel 1.2709 | 1,100 MPa aged · 50-54 HRC · conformal cooling inserts |
| SLA resin & PA12 | 0.05 mm detail · RA 1.6 um · snap-fits, masters, appearance models |
Finishing is where a printed part becomes a product
Four routes, all done in-house, all tested before shipping.
Four steps, no phone calls required
From your file to your door, with an engineer checking the design before anything is built.
Upload
STL, STEP, OBJ, 3MF, IGES - or a photo and a sketch.
Get quote
Printability review and price breakdown within 48 hours.
Production
Printing, stress relief, finishing, inspection.
Delivery
DHL, FedEx or sea freight, with an inspection report.
What is checked before your parts leave
Not "we check everything" - a specific list of measurements and tests.
Dimensional
CMM and caliper against your drawing
Material cert
Powder batch traceability on request
Colour
PVD checked against a signed master
Salt spray
24-96 h neutral salt fog testing
Report
Inspection report in every box
From prototype to mass production
Send a drawing or a sample. We cover DFM review, tooling, printing, PVD finishing, assembly, inspection and export - one partner for the whole product lifecycle.
Popular pieces, all customisable
Made to order in titanium and 316L, finished with PVD. Every price is for one piece - batch orders cost less.
Frequently asked questions
How much does 3D printing cost?
Resin prototypes typically start around $15-40 for a small part; metal parts from $40 for a palm-sized bracket; PVD coating and hand polishing are quoted per part. The four drivers are material volume, machine time, support removal and finishing - send a file and you get a line-by-line breakdown within 48 hours.
What file formats do you accept?
STL, STEP, OBJ, 3MF and IGES. STEP is preferred for metal parts because it keeps the design intent and tolerances; STL is a mesh and can only be scaled. A PDF drawing or a photo with dimensions works too if that is all you have.
How fast can you deliver?
Resin and FDM prototypes ship in 2-5 working days; metal parts in 5-10; coated and polished production batches in 7-30 depending on quantity. Rush orders are possible - tell us the date in the first message.
What is the minimum order?
One piece. There is no tooling cost, so a single unit is a normal order. Batch pricing starts at 10 pieces and improves significantly at 200+.
Get your quote within 48 hours
Upload a 3D file (STL, STEP, OBJ, 3MF) or just a photo / drawing. An engineer checks printability, flags anything that will not print, and replies with a clear price breakdown within 48 hours. From one prototype to 1,000+ pieces.
Prefer email? dimension3dHAN@gmail.com